Wolfbox G900 TriPro questions…

[SmokeBluePP271]

Any help would be much appreciated. Looking to get a G900 TriPro hardwired.

• I’ve read some have had issues with the OEM mount? Does the optional Wolfbox OEM bracket fix that?
• Where’d you install the cabin camera?
• The rear camera able to install on the hatch window? Not sure I’d want it on the outside especially in Canadian winters.
• For the hardwire kit… fuse tap or obd?
• Lastly is the polarizing lens worth it?

Any tips or recommendations would be greatly appreciated. Thanks! Can’t wait to get my Passport.

 

[SmokeBluePP271]

What I’m reading is I need an adapter to convert the trilobe mirror mount to a d-tab wedge mount. Amazon has this one but reading the reviews it isn’t compatible with the Wolfbox mount.

Brandmotion - Twist-Off Mirror Mount Adapter Bracket (5000-TFAB) https://www.amazon.ca/dp/B00MYEQ6KS?tag=trailsport-20

Anyone find one compatible?

 

[Trail_Jogger5]

I used one from this kit to mount my Wolfbox Tri-Pro Bumper:
https://www.amazon.com/dp/B0856QVW55?tag=trailsport-20
(I had to file the dovetails deeper to fully engage the mount on the mirror.)

Using the Wolfbox Model 1 oem bracket you will still need to notch the plastic cowling deeper for the mirror to clear.

 

[SmokeBluePP271]

That is definitely an option. Thanks! I’ve read some have ordered the mirror arm from AliExpress. I don’t have the vehicle yet so can’t provide the info they want. Has anyone here ordered that from AliExpress for a 2026 Honda Passport?

 

[Antman9 6]

So I installed the 840s recently. I mounted the camera to my victory rack but there was vibration over 40mph.
So- I mounted it inside the hatch like you stated. The top trim piece. Easy to take off (it's tight!) and the wires can run through the hatch accordion boots and into the rear trim.
Only issue is you have to scroll the camera view to be between the defroster lines. Make sure you mount it close enough to the rear window so that can happen. Works great.
I'm going to post some pics soon- I've been working on quite a bit of stuff, including this, but haven't updated my thread...